Qualcraft Adjustable Wood/Steel Roof Bracket User Manual download pdf (Page 2)

ROOFING

PRODUCTS

STEEL • ADJUSTABLE ROOFING BRACKETS

INSTRUCTIONS FOR INSTALLATION AND USE OF THE MODEL #2525 SLATERS STYLE ROOFING BRACKET:

CAPACITY: One worker per eight (8) feet of scaffolding plus 40 pounds of materials. GENERAL REQUIREMENTS:

When installed, the platform support arm must be set to match the pitch of the roof, allowing for the installation of a

fully decked and level walk surface. Secure by sliding lock completely between platform arm and base. MOUNTING

THE ROOF BRACKET: 1) All brackets shall be attached to the roof with 20-penny nails. Insert mounting-plate and

secure to roof using all slots. 2) Position bracket so that all nails penetrate both the roof’s surface and the rafter

below. 3) Spacing between brackets shall not exceed 8 feet. 4) Use teardrop holes in bracket only when bracket is

used for supporting roong materials. INSTALLING PLATFORM: 1) Wood platforms shall not be less than 2 inches

nominal thickness and shall extend beyond the platform arm not less than 6 inches and not more than 12 inches.

2) Always use clear, straight-grained wood free from knots or defects. 3) If extended length platforms are required,

use additional roong brackets every 8 feet. 4) Secure to bracket by nailing the platform to the bracket using the

hole provided in the platform retainer. INSTRUCTIONS FOR USE: 1) No more than one person shall occupy any

given 8 feet of a roong bracket scaffold. 2) Always use an OSHA compliant fall arrest system, guardrail, catch

platform or other safety equipment as required by Local, State or Federal OSHA Regulations. 3) Roof Brackets

are intended for use by the experienced tradesman. 4) OSHA Regulations require that employers provide training

in the use and care of this product. CARE AND MAINTENANCE: 1) Inspect all Roong Brackets before each use

to be sure that there is no damage or deformation, or deterioration from rusting. Discard if necessary. 2) Do not

throw or drop from a building or onto a truck. 3) Do not use if exposed to extreme heat or cold. Discard at once.

4) Do not use if wet or frozen.

INSTRUCTIONS FOR INSTALLATION AND USE OF THE MODEL #2510 WOOD/STEEL ROOFING BRACKET:

CAPACITY: One worker per eight (8) feet of scaffolding plus 40 pounds of materials. GENERAL REQUIREMENTS:

When installed, the platform support arm must be set to match the pitch of the roof, allowing for the installation of

a fully decked and level walk surface. Secure by sliding lock completely between platform arm and base. MOUNT-

ING THE ROOF BRACKET: 1) All brackets shall be attached to the roof with 20-penny nails. Use all teardrop holes

on left or all slots on right side of mounting plate as desired. 2) Position bracket so that all nails penetrate both the

roof’s surface and the rafter below. 3) Spacing between brackets shall not exceed 8 feet. INSTALLING PLATFORM:

1) Wood platforms shall not be less than 2 inches nominal thickness and shall extend beyond the platform arm

not less than 6 inches and not more than 12 inches. 2) Always use clear, straight-grained wood free from knots

or defects. 3) If extended length platforms are required, use additional roong brackets every 8 feet. 4) Secure

to bracket by nailing the platform to the bracket using the hole provided in the platform retainer. INSTRUCTIONS

FOR USE: 1) No more than one person shall occupy any given 8 feet of a roong bracket scaffold. 2) Always use

an OSHA compliant fall arrest system, guardrail, catch platform or other safety equipment as required by Local,

State or Federal OSHA Regulations. 3) Roof Brackets are intended for use by the experienced tradesman. 4)

OSHA Regulations require that employers provide training in the use and care of this product. CARE AND MAIN-

TENANCE: 1) Inspect all Roong Brackets before each use to be sure that there is no damage or deformation, or

deterioration from rusting. Discard if necessary. 2) Do not throw or drop from a building or onto a truck. 3) Do not

use if exposed to extreme heat or cold. Discard at once. 4) Do not use if wet or frozen.

Customer Support and Ordering Information

781-344-1000 • www.qualcraft.com

Industries • 1551 Central Street

PO Box 559 • Stoughton, MA 02072

1 2

PRODUCTS 1

Comments to this Manuals

No comments

Qualcraft Adjustable Wood/Steel Roof Bracket User Manual Page 2

Comments to this Manuals

Related products and manuals for Tools Qualcraft Adjustable Wood/Steel Roof Bracket